Flexmaster
Getting the most from a single source.
Liquefied Petroleum Gas, LPG, Composite Hose

Liquefied Petroleum Gas, LPG, Composite Hose

Part Number: LPG Hose
Designed for the Transfer of Liquified Petroleum Gas.
Manufactured with CS inner and outer wire and polyamide reinforcement. Also available in 316SS inner and outer wires. Available with crimped on schedule 80 carbon steel or stainless steel threaded ends. Also available with ANSI flanges. All assemblies are hydrostatically tested and are tested for electrical continuity. CSA certified to CAN/CGA-8.1-M86. Rated for full vacuum.

Diameters: 1¼”, 2”. 
Maximum working pressure: 200psi
Safety factor: 5:1.
Bend Radius: 1¼” = 5”, 2” = 7”
Weight per foot: 1¼” =1.1lbs, 2” = 1.7lbs
Temperature Range: -130°F (-90°) to 176°F (+80° C).
Maximum Length:100 ft.

Uni-CHEM® Composite Hose are manufactured in compliance with BS 5842 and are available with EN 13765 compliant construction. Marine Service Applications: All Uni-CHEM® hose styles are constructed to marine service specifications in accordance with US Coast Guard spec.154.500 and I.M.O regulations.


Liquefied Petroleum Gas, LPG, Composite Hose
Liquefied Petroleum Gas, LPG, Composite Hose
Home| Company| Downloads| Dealer Locations| Tradeshows| FAQs| Videos| Contact Us| Terms & Conditions
The information provided within is for informational purposes only. We have made every effort to ensure the accuracy of the provided information and assume no responsibility for any loss or damage due to errors or omissions or to the use or misuse of any information supplied. It is impossible to test all products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end users' responsibility to test all products under the conditions that duplicate the service conditions prior to installation. All improvements, all specifications are subject to change without prior notice. It is the buyer and/or end users' responsibility to review our complete Terms and Conditions.

© Copyright 2024, Flexmaster. All rights reserved. Dog Tube, Fabriflex, Flexmaster, Novavent, Insul-Vent, Insul-Liner, Novaflex US, The Novaflex Group, Polar Railflex, Triple Lock, U-Lok, Z-Flex, Uni-Chem, Z-Vent, ZQuote, Platinum Flow, Z-MAX, Z-DENS, Z-CENTRIC, Z-LOK, Dry-Release, HDC are ® Registered Trademarks of Flexmaster Canada Limited, Z-Flex (US) Inc and Novaflex Hose.

All materials (texts, trademarks, illustrations, photos, graphics, files, designs, arrangements etc.) contained in this Website are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of The Novaflex Group.

The graphic representation of the products is made for the sole purpose of illustrating the product and is purely indicative.

The Company reserves the rights to implement changes in product specifications without notice and as may be deemed appropriate by the Company for any technical or commercial reason.

Website Design and Development ByRed Leaf Development