Flexmaster
Getting the most from a single source.
CryoTec Marine Loading Arm

CryoTec Marine Loading Arm

Part Number: MLA2

The CryoTec is specifically designed for Cryogenic applications, e.g.: Ethylene and LNG 

Available from 6" up to 20", suitable for all liquids and gasses between -196 and + 200°C



Key Features

  • Hydraulic operation with smart hydraulic mechanism
  • Cable free design with adjustable balancing link
  • Supported structure
  • Only six swivel joints required with minimal jetty loads.
  • Cartridge type swivel joints
  • Nitrogen dried swivel joints
  • Double Ultra High Molecular weight PE Seal
  • Static back-up seal
  • Modular design suitable for container shipment
  • 10 years guarantee
Technical Details
  • Hydraulically operated
  • Dedicated hydraulic solenoid valves for each Marine Loading Arm
  • Completely balanced
  • 6" up to 20"
  • -196 °C / + 200 °C
  • Suitable for all (petro-) chemicals, liquids and gases. Especially cryogenic applications
  • 150# and 300#
  • Available in all Stainless Steel and Stainless Steel 316Ti.
Contact Us


Technical Details

Acrobat fileCryoTec Marine Loading Arm
CryoTec Marine Loading Arm
CryoTec Marine Loading Arm
Home| Company| Downloads| Dealer Locations| Tradeshows| FAQs| Videos| Contact Us| Terms & Conditions
The information provided within is for informational purposes only. We have made every effort to ensure the accuracy of the provided information and assume no responsibility for any loss or damage due to errors or omissions or to the use or misuse of any information supplied. It is impossible to test all products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end users' responsibility to test all products under the conditions that duplicate the service conditions prior to installation. All improvements, all specifications are subject to change without prior notice. It is the buyer and/or end users' responsibility to review our complete Terms and Conditions.

© Copyright 2024, Flexmaster. All rights reserved. Dog Tube, Fabriflex, Flexmaster, Novavent, Insul-Vent, Insul-Liner, Novaflex US, The Novaflex Group, Polar Railflex, Triple Lock, U-Lok, Z-Flex, Uni-Chem, Z-Vent, ZQuote, Platinum Flow, Z-MAX, Z-DENS, Z-CENTRIC, Z-LOK, Dry-Release, HDC are ® Registered Trademarks of Flexmaster Canada Limited, Z-Flex (US) Inc and Novaflex Hose.

All materials (texts, trademarks, illustrations, photos, graphics, files, designs, arrangements etc.) contained in this Website are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of The Novaflex Group.

The graphic representation of the products is made for the sole purpose of illustrating the product and is purely indicative.

The Company reserves the rights to implement changes in product specifications without notice and as may be deemed appropriate by the Company for any technical or commercial reason.

Website Design and Development ByRed Leaf Development