Flexmaster
Getting the most from a single source.
Extruded Material Handling

SF TPU (Wall Gauge 0.030")

Part Number: 9SFTPUW

All extruded, molecularly bonded urethane duct with encapsulated wire offers maximum abrasion resistance and superior tear resistance/tensile strength.  Molecularly bonded construction reduces turbulence for maximum flow efficiency.

Encapsulated wire protects surfaces from scuffing. Manufactured with FDA approved materials.
 

Applications

Sawdust collection
Lavatory waste

Pellet, material transfer

Excellent low temperature flexibility

Abrasion, oil, ozone and fungus


Construction:
Product code: 9SFTPUX
9SFTPUW (with wire)
Material: 0.030” clear extruded urethane
Diameters: 1.5” to 24”
Weight: 6” I.D.= 0.84 lbs/ft
Lengths: 25 & 50 ft. to 8” diam., 25’-10” diam. and up
Compression Ratio: 2:1
Temperature range:–65°F to +200°F
Colour: Clear with clear helix

*(available with and without encapsulated wire)

SF TPU   (Wall Gauge 0.030")
SF TPU (Wall Gauge 0.030")
Home| Company| Downloads| Dealer Locations| Tradeshows| FAQs| Videos| Contact Us| Terms & Conditions
The information provided within is for informational purposes only. We have made every effort to ensure the accuracy of the provided information and assume no responsibility for any loss or damage due to errors or omissions or to the use or misuse of any information supplied. It is impossible to test all products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end users' responsibility to test all products under the conditions that duplicate the service conditions prior to installation. All improvements, all specifications are subject to change without prior notice. It is the buyer and/or end users' responsibility to review our complete Terms and Conditions.

© Copyright 2024, Flexmaster. All rights reserved. Dog Tube, Fabriflex, Flexmaster, Novavent, Insul-Vent, Insul-Liner, Novaflex US, The Novaflex Group, Polar Railflex, Triple Lock, U-Lok, Z-Flex, Uni-Chem, Z-Vent, ZQuote, Platinum Flow, Z-MAX, Z-DENS, Z-CENTRIC, Z-LOK, Dry-Release, HDC are ® Registered Trademarks of Flexmaster Canada Limited, Z-Flex (US) Inc and Novaflex Hose.

All materials (texts, trademarks, illustrations, photos, graphics, files, designs, arrangements etc.) contained in this Website are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of The Novaflex Group.

The graphic representation of the products is made for the sole purpose of illustrating the product and is purely indicative.

The Company reserves the rights to implement changes in product specifications without notice and as may be deemed appropriate by the Company for any technical or commercial reason.

Website Design and Development ByRed Leaf Development